Construction and installation specifications and reinforcement methods of construction site enclosures

Construction and installation specifications and reinforcement methods of construction site enclosures

With the continuous development of society, I believe everyone is familiar with construction enclosures. Let's learn about fence construction together!

1. The equipment for maintaining the layout of the construction site enclosure shall be determined according to the development of the project, and shall be realized before the construction of this bidding section of the project, and shall not be arranged prematurely, and shall be Early blocking of traffic on half of the road surface.

The arrangement of the fence should be neat and stable, and the location should be based on the situation that does not obstruct the traffic and pedestrians on the road. In addition to the entrance of income and expenditure, it should continue to block the entrance of income and expenditure. , to keep the construction site away from the outside world, make good traffic guidance signs before the enclosure, and assign a person to be responsible for the traffic order during the construction period. Adjacent to the fixed area, it is strictly forbidden to pile up residual soil, construction data and other debris, and the scope of the construction site is clean and tidy.

2. The size of the construction site enclosure is required to be fixed. After the enclosure is arranged on site, the transmission of dust and music can be effectively avoided, and the safety protection of the construction site is maintained step by step. difficult. In the suburbs, the coherent part is not less than 2.5m, and the rest is 1.8m. The applied thickness is not less than 0.45mm. If pedestrians and vehicles pass this risk through the eyes of pedestrians and vehicles to drive safely at the intersection, the pulley height along the intersection is 1.5 meters. This makes it easy for pedestrians and drivers to see the road conditions, improving construction safety.

3. The construction site enclosure should normally protect and control the shell, adhere to the incomplete shell, clean, ugly, and without damage. The construction site should be cleaned up immediately after the construction is completed. Adhere to the abstraction of safety and savagery, and achieve savage construction specifications for site enclosure construction.