Every corner of the light steel villa should be evenly coated with paint

The thickness of the paint film is generally 2.5mm. After the paint is mixed in a ratio of 1:2, it should be fully stirred and painted in 5 times. The amount of each layer should be less than 0.6kg/m2. After a night from step 5, the scraping operation is ready. According to the design requirements of the waterproof layer, use a scraper to scrape the coating. The seismic performance of the light steel structure of the light steel villa is much better than that of the traditional concrete and brick houses. At the same time, due to the light weight of the light steel structure, the weight per unit area is only 1/4 of the weight of the brick-concrete structure of the same area, so its foundation is easy to handle and suitable for most geological conditions. Steel structure homes are no longer as worried about termite damage as wood structure homes. Since the steel materials used in the structure of the light steel villa company are all processed in factories, the structural accuracy of the light steel structure villa is quite high. The structural system of a villa consists of tens of thousands of components, and the average error of each component is less than 2 Millimeters ensure the quality of the house, which cannot be achieved by conservative construction methods to promote the industrialization of construction, which will contribute to energy conservation and environmental protection, and is of great benefit to the governance of the atmosphere. Therefore, the development of light steel buildings has been put on the agenda.

The dosage is 0.3KG/㎡ after the bottom layer is diluted. Note that every corner of the light steel villa should be evenly coated with paint. Every corner should be brushed several times. After the smear layer is dry, use a round wooden stick for non-woven fabric (60-80g) padding and construction immediately. Level the ground for base treatment. Do the unevenness and cracks, and plug the leakage to make it smooth, firm, clean and free of leakage. Before disposing of the two sides of the bottom of the gutter, joints, and bites, it is necessary to use polyurethane sealant to fill the gaps and smooth them with paint. Make the edge arc smooth and smooth without water accumulation. The downspout in the gutter should also be bitten and the joints should be compacted and filled. Note that the water outlet should not be high, or the water should be disposed of before the overall construction work.

Competitiveness policy of Lida Group is about existing clusters as a platform for upgrading microeconomic fundamentals, where structural policies aim to change the industrial composition of an economy more directly.

Lida Group provides various models for the prefab shipping container homes, as this being the most beneficiary equipment in prefab homes. Extra features of prefabricated house manufacturers prefab houses make it an perfect tool in the prefab house manufacturers aspect. Visit Lida Group for the professional assistance by the experts.

Lida Group are providing this to you at very low cost. Our claims are only based on different feed-backs received from various clients and not based on self-judgment.