How to choose a suitable construction site and fence for on-site construction

Construction enclosures should be located reasonably, avoiding strong wind outlets, river banks (perforated enclosures can be used for this), spillways and areas affected by dilapidated buildings, and should not be built where landslides, collapses, mudslides, and flash floods are prone to occur. and other risky areas and low-lying water-logged areas; when approaching the river, structural reinforcement methods should be adopted based on the results of planning checks, and it is not suitable to be close to deep foundation pits or high walls; Bearing capacity requires foundation treatment or reinforcement. At the same time, a certain safety and fire protection distance should be kept from high-voltage wires, pressure pipes, pressure vessels and flammable and explosive places. First of all, it is necessary to understand the purpose of setting up temporary construction fences. Setting up temporary fences is a necessary condition for civilized construction, and it can also prevent outsiders from entering and leaving the construction site at will and avoid safety accidents. Secondly, before the construction of the temporary construction fence starts, three connections and one leveling are required (specifically: water connection, electricity connection, road connection and site leveling), the foundation is complete, and the construction area should form a closed construction, and the temporary fence can be built first As a temporary enclosure for construction sites. Standards for construction enclosures The construction site is closed for management, with entrance and exit gates set up, gate guard rules drawn up, and registration rules for outsiders strictly enforced. The enclosures shall be continuously set up around the construction site. The enclosure height shall not be less than 2.5 meters for the main road sections in the urban area and other designed city scene sections, and the enclosure height for other construction sites shall be no less than 1.8 meters. The enclosure material requirements. , Precautions for building temporary construction enclosures When constructing construction enclosures and manufacturing devices, when surveying the site, technicians need to first consider whether the site needs to use forklifts for land leveling, and also need to see whether it will be better to use manpower or hook machines when excavating good.