How to control the installation height of construction enclosures?

How to control the installation height of the construction enclosure?

After the construction of the construction enclosure is completed, the connection between the plates and the plates should be smooth, and the straight line should be in a straight line; No gaps should be left, that is, the construction inside the site cannot be seen from outside the site. Set up red lights along the construction fence or use reflective cones in partitions to warn the fence at night.

1. One point to pay attention to in the use of construction enclosures is that, if there are preconditions, corresponding slogans or some Corresponding propaganda information, in particular, it is necessary to place some special information barriers that can be beneficial to the propaganda of spiritual civilization.

Only in this way can we provide you with a role of publicity and guidance, and at the same time, it can also bring positive energy, which is also when using construction enclosures. A rigid requirement, only in this way can the construction enclosure be effective and become a scene in the city, rather than destroying the image of the city.

2. When building a construction enclosure, pay attention to its height. The height is also very important. Because there is a very clear delineation, if it is in the If a construction fence is to be built in such sites as airports, docks, squares, stations, etc., it is necessary to pay attention to the height of the construction fence. It needs to be at least 2.5 meters high to be considered qualified and regular fence block.

In ordinary road construction, the height of the construction enclosure cannot be lower than 1.8 meters. These are all rigid delimitations and are in the process of construction. When setting the enclosure, you must abide by it, so that you can use it for everyone.