How to deal with the deformation problem of construction site enclosure reasonably

How to reasonably deal with the deformation of the construction site enclosure

The various materials of the construction site enclosure will have different levels of deformation after processing, and the construction site enclosure quotation is somewhat The data will become slightly circular after the end, but the reason for this irregularity, our customers do not seem to understand this. So how do we deal with this problem?

1. The deformation of the construction site enclosure is related to the quality of the data. The deformation level of different materials after stamping is different. Stainless steel has large deformation levels and is difficult to level. This is because the steel properties of stainless steel have certain resistance, so it is difficult to achieve the same flatness as before stamping.

2. The influence of the lubricity of the construction site enclosure is the edge of the plate. The larger the edge, the worse the flatness, especially the larger the aperture ratio, the larger the aperture. The larger the edge, the worse the flatness. But don't worry, we have flattening equipment. We will do our best to flatten the paper to facilitate the customer to use the construction site fence to quote.

The surface should be smoothed after the site enclosure is machined. The so-called flattening refers to the use of flattening machines and other equipment to restore the original plane condition of the perforated plate after CNC stamping. In addition, site enclosures are usually cleaned after leveling, during which time a lubricant is used to make the NC punching plate cleaner. In order to minimize various errors in the production process, it is necessary to determine how to process, which mold to use, and which method to choose to better calender the product before production, which greatly limits the quality of CNC punching products Construction site fence quotation.