How to handle the foundation of a high-rise building from a ground prefab

Before using a prefab house, we need to work on its foundation to make sure that the prefab house is ready to use after it is put into use. Mobile Home Next, the manufacturer will briefly discuss what to do with the basics of a mobile home.

1. The hardness test should be performed first. For special terrain, the hardness of the foundation varies greatly. Special treatment should be carried out to ensure that the light steel prefab can be installed smoothly and to ensure its quality.

2. Level, after basic measurement is completed, the next step is basic pouring. The key is to measure the level first. After the pouring is completed, the control level error should be within 10mm. It should be noted that in the process of accounting with the other party, after completing the foundation of the light steel prefab, the other party must be required to ensure that the basic level is within the error range, so as not to affect the follow-up work. work process.

3. Specific marking. Generally, the base is C20 and there is no steel inside. Of course, in special terrain or other irresistible conditions, the final plan should be carried out according to the technician's decision.

4. The pouring time is the same as the traditional concrete pouring process. Light steel prefabs cannot reduce this process. After the foundation is poured or the prefab house is installed, there should be enough time for the concrete to meet the hardness requirements.

5. Finally, when laying the foundation, it must be poured together with the indoor ground. This level is the same foundation that ensures installation time, quality and aesthetics after installation.

Treat the foundation of a prefab house in this way. Only a good foundation can ensure that our prefab houses will perform their full function during normal use and will not result in prefab houses due to foundation problems. Not available.