Installation requirements for rainwater pipes in packing houses

The packing house is a new type of building, which can be used as a temporary work station all over the city. Steel plates, these materials not only increase the stability of the house structure and the service life of the house, but also are energy-saving and environmentally friendly materials, and the cost is also reduced a lot, which is conducive to the popularization of houses, especially in retail terminals and hotels. is favored. The packing house can be used as a house for long-term living, and the room configuration is the same as that of an ordinary house. It is also necessary to install rainwater pipes in the packing house, and the installation requirements of the rainwater pipes in the packing house are required.

Installation of rainwater pipe

Install from the bottom, pay attention to the raised part is the bottom reducing joint of the pipe. Forcefully pull the middle part of the water pipe into a bow shape, and then relax after being symmetrical with the upper water hole.

To install the wall panel, first install the 2x25 sealing tape to the edge of the top frame and the column (manual). Fix the baffle connector to the four corners first. Tools: Install the wall panel from the corner post on one side with a hand drill and confirm that the wall panel is snug on both sides of the top frame. Tools: Guide plate, assemble the remaining wall panels according to this method, and install metal connecting pieces on the frame after all the wall panels are installed. Install the 8mm*12mm bolts and nuts on the connecting piece in advance and place them in a certain position to tighten the bolts. (Each board is two connecting pieces), tools: wrench, when the wall board is installed in the same gap, fill the gap with two rock wool boards, please take appropriate personal protection when filling rock wool boards.

The structure of the packing box room is stable and durable, and it can usually guarantee a structural cycle of more than ten years. It can also last a long time in the case of good maintenance conditions or in conjunction with other structures such as concrete. Packing room units are standardized in size. Due to the need for sea-land combined transportation, its external dimensions are strictly limited. Except for individual packing rooms that are specially customized, most of the packing rooms are standard and uniform. The flexibility of the packing box room, the advantage of the packing box room is the flexibility of construction. When the part needs new renovation, it can be replaced with a new box body. When it needs to be removed and dismantled, it can be easily dismantled as a whole and rebuilt in different places.