Residential container installation, use and recycling

Installation, use and recycling of residential containers

In order to make our residential containers last longer, we must install them in accordance with standards, then residential container houses What are the installation standards?

Standards for the installation of residential containers with long service life:

1. The installation of steel structural parts should meet the standard requirements, and the welding position should not be Omissions, and do not make mistakes in welding, which will lead to unreliability or even cracking in the later stage.

2. The wall should be installed horizontally and vertically, the caulking should be dense and smooth, the width of the deep and shallow seams should be the same, and the board surface should not be damaged.

3. If the wallpaper needs to be pasted indoors, it must be smooth without bubbles and neat.

4. The ceiling should be assembled with flat seams and straight seams, the gaps should be consistent, the wallpaper should be clean, and the board surface should not be broken. The damaged parts of the wallpaper surface during transportation should be repaired.

5. The floor should be laid with ash, and the floor with cracks on the floor should not be installed and used.

6. The surface of the cement or fine stone concrete surface should be compacted and calendered, and there should be no defects such as cracks, peeling, sanding, and hollowing.

7. Asbestos tiles must be laid in the leeward according to the local wind direction, and the cornices should be kept straight, the tiles should not have cracks, and the vertical lap length of asbestos tiles should not be less than 100mm, no less than one wave for the middle wave tile and no less than two waves for the small wave tile, each asbestos tile hook is two fixed points, the tile hook should be properly tightened, and there should be no water leakage on the roof.

8. The white iron gutter joints of the container mobile house should be welded firmly, and the joints should be treated with anti-corrosion. There should be no water accumulation in the gutter, no leakage, and no downpipe The installation is vertical and firm, and the hoop spacing is 1300mm.

9. Install the doors and windows accurately and fasten them with bolts.

10. Residential containers can be moved and recycled anytime, anywhere.

Nowadays, it is very common for us to utilise in prefabricated house manufacturers. And the quality of is decisive to production efficiency.

Satisfying our customers with the appropriate level of quality is a primary goal and a fundamental element as prefab houses of our business mission.

prefab houses can be great additions to companies looking to improve the well-being of their employees, as well as increase the efficiency and productivity of their workers across the organization.

have three basic components.