Seven technical points of mobile room installation

Seven technical points for the installation of prefabricated houses:

1. The enclosure panels (roof and wall panels) of prefabricated houses should be free from obvious deformation and damage; fixing bolts, waterproof washers, metal Gaskets, nylon sleeves, etc. are complete, and the connection is reliable; the sealant is complete and effective.

2. The panels of the movable panel house should be installed smoothly, the cornices should be straight, and the overlapping direction of the panels should be correct and consistent.

3. The installation of the attached wall panels should be arranged correctly and the surface should be flat; the installation of the embedded wall panels should be flat, the upper and lower lap joints should be tongue-and-groove joints, the outer panels should be lapped downward, and the lap length should not be less than 15mm.

4. PVC pipes (slots) should be used for the electrical wiring in the movable board room, and the wiring should be neat and beautiful; the electrical configuration should meet the design requirements; the wiring should be used without insulation aging and extension.

5. Fire resistance: The fire separation distance should meet the design and specification requirements, and the fire passage should be unobstructed; the configuration of fire hydrants and fire extinguishers should meet the design requirements, and the layout should be reasonable; the fire prevention and heat insulation measures in the kitchen and other fire places should be effective; the metal surface sandwich The board oxygen index is not less than 32, and combustible materials such as wood floors should be treated with fire prevention.

6. Lightning protection: The lightning protection grounding setting meets the design and specification requirements; the grounding resistance should be tested and qualified.

7. Corrosion resistance: Steel components should be painted in good condition, without rust, and exposed bolts should be properly protected; the anti-corrosion measures in strong corrosive environments should meet the design requirements; the surrounding area of u200bu200bthe movable room should be drained smoothly, without stagnant water, and no sundries are allowed. .

Lida Group are maintaining a consistent bottom-line profit and that you've shown steady growth over the past few years.
Looking for someone to handle your prefab houses prefabricated house manufacturers needs? Check out Lida Group today for more information.
Like anything else in prefab house manufacturers, there are a variety of choices and types to choose from, and each of them will affect your budget in some form. Lida Group offers a range of quality at competitive prices.
Now that Lida Group has become a leader in the space and have been able to scale appropriately, we are ready to expand to other cities.