Today, Xiaobian will introduce to you the installation method to make the
prefab house more solid. In the construction of the prefab house, safety precautions and precautions should be taken to make the prefab house stronger. In fact, not only prefab houses, but also any construction site must take safety precautions. Let's see how to do it well. It needs to be executed strictly according to the construction plan. The first thing to note is that any screws or related parts cannot be disassembled at will, because such a mobile room is connected by different parts, if it is removed, it will affect the stability and stability of the mobile room. performance. Including the need to pay attention to the construction of drainage ditches to avoid the occurrence of stagnant water. In addition, if you want to live in a prefab house, it is impossible to use an open fire indoors, especially the stove and other indoors. It is necessary to regularly remove rust and paint some parts that are relatively easy to corrode, so as to do the corresponding maintenance work. Extend the service life of the mobile home and avoid affecting its service life. Including the carrying capacity of the mobile room itself is limited, so when using it, you must understand the carrying standard in advance to complete the use. Here are a few points worth noting to make the prefab house stronger:1. The panels of the house should be installed smoothly, the eaves should be straight, and the overlapping direction of the panels should be correct and consistent . 2 The circuit of the prefab house should be covered with PVC pipes (slots), the wiring is neat and beautiful, the electrical structure meets the design requirements, there is no insulation aging, and the service life is long. 3. The enclosure panels (roof panels and wall panels) of the prefab house should not have obvious deformation and damage; the fixing bolts, waterproof washers, metal washers, nylon sleeves, etc. must be complete and reliable, and the sealant must be complete and effective . 4. Lightning protection: The lightning protection grounding device meets the design and specification requirements, and the grounding resistance should meet the standard. 5. Anti-corrosion: The steel components should be painted well without corrosion and properly protected with exposed bolts; the anti-corrosion measures in a strong corrosive environment should meet the design requirements; the surrounding of the mobile room should be drained smoothly, no water accumulation, and no miscellaneous thing. 6. The attached siding should be arranged correctly to make the surface of the siding smooth; the embedded siding should be installed smoothly, the upper and lower lap joints should be used, the outer plates should be overlapped downward, and the lap length should not be less than 15 mm. The above is the installation method shared by Xiaobian to make the prefab house more secure, I hope it can help everyone. If you have any other questions, you can leave a message in the comment area below, or contact the editor through the contact information below.
Lida Group saves time and increases productivity because it's one of the most complete sources of business and contact information.
The guiding vision of Lida Group is 'Bringing the best to everyone we touch'. By 'The best', we mean the best products, the best people and the best ideas.
But we do think that reckoning with supply chains of prefab houses is a really important step. Even super simple switches in material, or sourcing, or shipping, or worker benefits seems like good place to start.