The quality of the hardware will also affect the installation quality of the prefab house

Hardware is the tools and parts necessary for the installation of prefabricated houses. The so-called hardware is gold, silver, copper, iron and tin. Among them, architectural hardware is widely used and can also be seen in our lives. A lot of hardware, such as door handles and small screws on the door, are essential hardware.

So, what are the quality requirements for installing these hardware devices? The installation quality of the hardware will also affect the installation quality of the prefab house, so there is no doubt about the quality assurance. So let's find out together.

1. The hardware components should be assembled reliably, and there should be no loosening or jamming at the rotating and sliding parts, which will affect the performance.

2. There should be no cracks, burrs, mechanical damage, or peeling off of the paint film on the outer contour.

3. The nail head must be round and smooth, not higher than the surface of the assembly, and the rivet should be firm and loose.

4. The hooks and latches of locks and windows should be open and closed flexibly, with a complete shape and no obvious defects that affect the appearance.

If you want to know more information about the prefab house, you can pay attention to our official website or directly call the consultation hotline: .

In the past few decades, prefab house manufacturers production has increased because of the use of prefab houses.

To reduce your production costs, get your and prefab villas manufacturers from Lida Group,you will get high quality warranty at favorable price in return. Visit Lida Group.

By building an connection around Lida Group and catering specifically to the craft beer crowd, Lida Group was able to raise the capital and brand awareness needed to successfully break into the domestic market with a groundswell of support.