Various types of construction site enclosure standards and height requirements

The height requirements of construction fences are as follows: Conventional fence height requirements: fence height shall not be less than 2.0 meters, pole span shall not exceed 3.0 meters, and steel wire grid size shall not exceed 100mm*150mm. Enclosure height requirements for high-rise buildings: the enclosure height shall not be less than 3.0 meters, the pole span shall not exceed 3.0 meters, and the steel wire grid size shall not exceed 100mm*200mm. Enclosure height requirements for special occasions: According to the actual situation and safety requirements, the enclosure height can be increased appropriately. For example, in areas such as tourist attractions, stations, airports, stadiums, government agencies, and large-scale event venues, the height of the fence is generally not less than 2.5 meters. It should be noted that the above requirements are for reference only, and the fence height should be set reasonably according to local regulations and actual engineering conditions to ensure the safety of the construction site and protect the surrounding environment and personnel safety. In the demolition project, the height of the fence at the construction site should meet the following requirements: The height of the fence should not be lower than 2 meters: In order to ensure the safety of work and the safety of people and objects around, the height of the fence should not be lower than 2 meters. Enclosure materials meet the requirements: enclosure materials such as protective nets and baffles should be used, and the materials are firm and not easy to fall off. Reasonable fence setting: the fence should be set up firmly, the fence board should be close to the construction operation panel, and each board should be installed firmly and tightly combined, and should have a shielding effect. Reasonable setting of enclosure doors and windows: Corresponding doors and windows should be set up on the construction site enclosure to facilitate the entry of workers and material transportation. At the same time, the design of doors and windows should be reasonable and comply with safety regulations. It should be noted that the above content is for reference only, and the specific requirements for enclosure materials, enclosure doors and windows, and enclosure height must be specified in accordance with relevant local regulations and industry standards.