What should be paid attention to in the installation of construction site enclosures

What should be paid attention to in the installation of construction site enclosures

As we all know, mobile enclosures are a kind of product that can be seen in many construction projects at present. Therefore, its installation can be said to be very important. So do you know what needs to be paid attention to in the installation of construction site enclosures?

1. The enclosures at the construction site of urban housing construction projects must be made of hard materials and set continuously. The height of the retaining wall of the main road sections in the urban area shall not be less than 2.5 meters, and the height of the retaining walls of the construction site of general road sections shall not be less than 1.8 meters.

2. When installing the construction site enclosure, measure and position the temporary enclosure according to the construction plan reported and approved in the early stage. After setting out the line, please confirm with the supervisor and the owner , and adjust the parts that do not match the drawings in time.

3. The material used for the construction site enclosure is color steel plate. The color steel plate can be used to make a flat foam sandwich panel enclosure, and a layer of 5cm thick EPS foam is sandwiched between the two color steel plates as the enclosure material. Its width is generally 950mm; the length depends on the height of the enclosure. If the height of the enclosure is 2 meters, the height of the color steel plate is close to 2 meters.

4. The construction site enclosure is made of 50mm thick outer white and inner blue light-weight double-layer sandwich color steel plate, with a height of 2.0m, a column side length of 800mm, and a square steel pipe with a height of 2m. , the wall thickness of the steel pipe is 1.2mm. The top and bottom beams of the enclosure adopt C-type galvanized grooves. A profiled steel column anchored to the ground is set up every 3m. The bottom of the concrete pavement column is welded with a 90mm×180mm×1.5mm steel plate. The steel plate is anchored with four 13mm φ10 expansion bolts to fix the foundation surface to ensure the enclosure is stable, clean and beautiful. .

5. Solar warning red lights are installed on the top of the fence of the construction site, the spacing is the same as that of the profiled steel columns, and a reflective film sign is set on the outside of the fence of the approaching lane. The outside of the enclosure adopts the company-specified background pattern and is equipped with a company-approved promotional slogan.